ENSONIQ SQ-R User Manual

SQ-R Musician's Manual Section 4 - Effects
Detune Depth
This parameter controls the depth of the detuning, that is, how much the pitch will
change. Low values yield a metallic sound. Some voices may require very low
values.
Range: 0to99
HF Damping — High Frequency Damping
The High Frequency Damping parameter controls the amount of attenuation of
high frequencies in the decay of the reverberation. As natural reverb decays,
some high frequencies tend to get absorbed by the environment. Increasing the
value of this parameter will filter out increasing amounts of high frequency
energy.
Range: 0to99
HF Bandwidth — High Frequency Bandwidth
The High Frequency Bandwidth parameter acts as a Low Pass Filter on the signal
going into the reverb, controlling the amount of high frequencies that will pass
into the effect. The higher the setting, the more high frequencies are allowed to
pass.
Range: 0to99
Low Frequency Decay
This control will boost or cut the rate at which low frequencies will decay.
Range: 0to99
Effect Parameters 4-11

ENSONIQ SQ-R Specifications

General

Brand	ENSONIQ
Model	SQ-R
Category	Synthesizer
Language	English