What to do if I cannot change any function on my Entel Transceiver?
If you cannot change any function on your Entel Transceiver, it is likely that the key lock is switched on. Turn the key lock off to regain control of the functions.
Why is my Entel Transceiver not switching on?
Your Entel Transceiver might not be switching on because the battery is exhausted and needs charging. You can either charge the battery pack or replace it with a fully charged one.
What to do if my Entel Transceiver transmits without pressing PTT button?
If your Entel Transceiver transmits without pressing the PTT button, it's likely that VOX has been enabled. Press the assigned VOX button to switch VOX off.
What to do if I am receiving calls from other users outside my Entel radio system?
If you're receiving calls from users outside your Entel radio system, there may be congestion on the channel. Contact your dealer for a new frequency or sub tone assignment.
How to start scan on Entel Transceiver if the scan key does not work?
If the scan key on your Entel Transceiver does not start the scan, it may be because no channels are memorized. Enter the desired channels into scan memory.
What to do if LED on CCA640 & CWC640 Entel does not illuminate when charging?
If the LED on CCA640 & CWC640 does not illuminate when charging, clean contacts with dry clean cloth. The cause may be dirty terminal contact on CCA640.
General| Brand | Entel |
|---|---|
| Model | HT782U |
| Category | Two-Way Radio |
| Language | English |
To Next Page
