Page 5
Redundant Power Supply Equipment Specifications
Mounting Boxes Specifications
D2-HIPWR-POE Combiner
Dimensions (L x W x H)
8.16 cm (3.17”) x 9.0 cm (3.54”) x 3.29 cm (1.3”)
Input Voltage
Accepts two 50V 2.6A (max) power supplies
D2-PWR
Dimensions (L x W x H)
16.9 cm (6.65”) x 6.5 cm (2.56”) x 3.75 cm (1.48”)
AC Input Frequency Range
50 – 60 Hz
AC Input Voltage Range
100 – 240 VAC
Output Voltage
19 V 6.32 A
Net Weight (Unit Only)
0.84 kgs (1.85 lbs)
MTBF
60,000 hours at 25° C (77° F)
Operating Temperature
0° C to 40° C (32° F to 104° F)
Storage Temperature
-40° C to 70° C (-40° F to 158° F)
Operating Relative Humidity
20% to 80%
AC Input Frequency Range
47 – 63 Hz
AC Input Voltage Range
100 – 240 VAC
Maximum Output Power
120 W continuous
Power Consumption
7.3 W
Thermal Output
24.88 BTUs/Hr
D2-PWR-POE
Dimensions (L x W x H)
19.6 cm (7.72”) x 8.8 cm (3.46”) x 5.1 cm (2.01”)
AC Input Frequency Range
47 – 63 Hz
AC Input Voltage Range
100 – 240 VAC/ 3.2A
Output Voltage
50 V 2.6 A max
Net Weight (Unit Only)
.75 ~ .916 kgs (1.65 ~ 2.02 lbs)
MTBF
195,130 hours at 25° C (77° F)
Operating Temperature
0° C to 70° C (32° F to 158° F)
Storage Temperature
-45° C to 85° C (-49° F to 185° F)
Operating Relative Humidity
5% to 95%
AC Input Frequency Range
47 – 63 Hz
AC Input Voltage Range
90 – 260 VAC
Maximum Output Power
130 W continuous
Power Consumption
14.5 W
Thermal Output
49.48 BTUs/Hr
D2-LOCKBOX
Dimensions (L x W x H)
39.1 cm (15.375”) x 37.7 cm (14.850”) x 5.9 cm (2.313”)
D2-RMT
Dimensions (L x W x H)
46.0 cm (18.110”) x 44.1 cm (17.362”) x 4.4 cm (1.732”) (the width
does not include the rack ears, +2.0 cm (+0.776”) each side)
D2-TBL-MNT
Dimensions (L x W x H)
21.6 cm (8.504”) x 37.0 cm (14.567”) x 10.5 cm (4.130”) (the width
does not include the mounting tabs, +2.3 cm (+0.905”) each side)
D2-WALL-MNT
Dimensions (L x W x H)
21.7 cm (8.560”) x 21.0 cm (8.250”) x 5.9 cm (2.310”) (the width
does not include the mounting tabs, +1.6 cm (+0.638”) each side)
To Next Page
Loading...
Need help?
General
