Need help?Do you have a question about the Enterasys D2G124-12 and is the answer not in the manual?
General| Brand | Enterasys |
|---|---|
| Model | D2G124-12 |
| Category | Network Router |
| Language | English |
Details FCC compliance for Class A digital devices and radio frequency energy.
Outlines radio noise emissions compliance for digital apparatus according to Canadian regulations.
Warns about potential radio interference from Class A products in domestic environments.
States compliance with VCCI standards for Class A information technology equipment.
Information on separate collection and proper disposal of electronic equipment.
Provides safety guidelines for Class 1 laser transceivers used in the device.
Warns against direct viewing of laser output and handling of fiber optic ports.
Identifies the intended audience for this hardware installation guide.
Explains how to navigate and best utilize the information within the guide.
Lists other relevant documentation for configuring the switch.
Explains typographical conventions and icons used throughout the manual.
Defines common acronyms used in the document for clarity.
Provides contact information and procedures for obtaining technical support.
Provides a general overview of the Enterasys D2 switch family and its features.
Details the specific models, ports, and capabilities of the D2G124-12 and D2G124-12P switches.
Lists and describes the key features and capabilities of the D2 switch.
Describes the optional D2-HIPWR-POE power combiner for enhanced PoE delivery.
Explains the Power over Ethernet capabilities and compliance of the D2G124-12P switch.
Defines the classifications for Powered Devices (PDs) that can receive power via Ethernet.
Instructions for safely unpacking the D2 switch and its components.
Provides a guideline for the sequence of installation steps based on mounting options.
Details various physical mounting options for the D2 switch, including rack, table, and wall.
Steps for connecting primary and redundant power sources to the D2 switch.
Instructions for establishing a console connection for initial setup and management.
Covers connecting the switch to the network using UTP, SFP, and fiber-optic cables.
Steps for installing an optional plastic cover for the switch.
Final steps to power on, verify operation, and perform initial setup of the switch.
Explains the meaning of various LED indicators for system status and diagnostics.
Procedure for resetting the switch login password to its default value.
Steps to reset the D2-HIPWR-POE power combiner in case of overload or short circuit.
Provides detailed I/O, processor, memory, and physical specifications for the D2 switches.
Lists the technical specifications for the D2-HIPWR-POE power combiner.
Details the specifications for the available D2 power supply units.
Recommended torque values for installing screws and bolts during setup.
Technical specifications for various SFP (Mini-GBIC) modules compatible with the switch.
Provides the pinout configuration for the console port connection.
Lists the safety, EMC, and environmental standards the product complies with.
To Next Page
