Enterasys D2G124-12

Unpacking the D2 Switch
2-2 Installation
Unpacking the D2 Switch
Shipped With the Switch
Inspectthecontentsforanysignsofphysicaldamage.ContactEnterasys Networksifitis
damaged.Referto“GettingHelp”onpage xviifordetails.Thecontentsofthepackageinclude:
•D2switch
•RJ45toDB9adapter(forusewiththeRJ45consoleportifnecessary)
•Variousdocumentation,includinganoptionalpolicylicense,if
purchased
•OnepowersupplymoduleandACcord
• Optionalrubberfeet(forusingtheswitchasafreestandingdevice)
Optional Components
OptionalcomponentsshippedseparatelyfromtheD2switchincludethefollowing:
•Oneormoreadditionalpowersupplymodule(s)forredundancy,eitherD2‐PWRor
D2‐PWR‐POE
•D2‐HIPWR‐POEpowercombiner
•Oneofthefollowinginstallationkits:
– Rackmountinstallationkit(D2‐RMT)
–Tablemountinstallationkit(D2‐TBL‐MNT)
– Wallmountinstallation
kit(D2‐WALL‐MNT)
–Metallockboxwallmountinstallationkit(D2‐LOCKBOX)
• Optionalplasticcover(D2‐COVER‐W)
Note: Unpack the D2 switch components only as needed. Leave the components in their
respective shipping cartons until you are ready to install that component. Save all shipping
materials in the event that the switch has to be repacked.
Note: Both power supplies must be of the same type to support redundancy.