Enterasys D2G124-12 User Manual

Enterasys D-Series Hardware Installation Guide A-1
A
Specifications
Thisappendixprovidesinformationaboutthefollowing:
Enterasys Networksreservestherighttochangethesespecificationsatanytimewithoutnotice.
Switch Specifications
Table A‐1providestheI/Oports,processorsandmemory,physical,andenvironmental
specificationsfortheD2G124‐12andtheD2G124‐12P.
For information about... Refer to page...
Switch Specifications A-1
D2-HIPWR-POE Specifications A-2
Power Supply Specifications A-3
Torque Values A-3
1-Gigabit Ethernet and 100Base-FX Transceiver (SFP) Specifications A-4
Console Port Pinout Assignments A-7
Regulatory Compliance A-7
Table A-1 D2 Specifications
Item Specification
Ports
RJ45ports 1 through 12
Twelve 10BASE-T/100BASE-TX/1000BASE-T compliant ports with
auto-sensing and auto-negotiation via RJ45 connectors. On the
D2G124-12P, these ports also support 802.3af PoE connections.
Combo SFP ports 11 and 12 Two ports that support optional Mini-GBICs 1000BASE-FX/LX/SX
fiber-optic connections and 1000BASE-T copper connections.
When an SFP transceiver (Mini-GBIC) in SFP port 11 establishes a link,
RJ45 port 11 is disabled. When an SFP transceiver in SFP port 12
establishes a link, RJ45 port 12 is disabled.
Processors/Memory
Processor MPC8241, 266 MHz processor
Dynamic Random Access
Memory (DRAM)
256 MB
FLASH Memory 32 MB

Enterasys D2G124-12 Specifications

General

Brand	Enterasys
Model	D2G124-12
Category	Network Router
Language	English