Enterasys D2G124-12 Datasheet

Page 4
Specifications
D2G124-12 D2G124-12P
Description
12-port 10/100/1000 switch with 2 SFP combo ports and
power brick
12-port 10/100/1000 PoE switch with 2 SFP combo ports and 130 watt
power brick
Port
12 fixed RJ-45 10/100/1000 ports (Type 10Base-T, Type
100Base-TX, Type 1000Base-T)
12 fixed PoE RJ-45 10/100/1000 ports (Type 10Base-T, Type 100Base-
TX, Type 1000Base-T)
2 combo SFP GBIC ports (a total of 12 of the 14 front
panel ports can be active at one time)
2 combo SFP GBIC ports (a total of 12 of the 14 front panel ports can be
active at one time)
Power Supplies
The switch supports redundant power feeds so 2 power
“bricks” can be used in cases where redundancy is
required. See Accessories for additional power bricks.
The switch supports redundant power feeds so 2 power “bricks” can
be used in cases where redundancy is required. See Accessories for
additional power bricks.
Form Factor
Fixed standalone. Two D2s side by side can be mounted
in a 19 inch rack.
Fixed standalone. Two D2s side by side can be mounted in a 19 inch
rack.
Memory and Processor
256 MB RAM
32 MB flash memory
256 MB RAM
32 MB flash memory
Performance
Throughput
17.86 Mpps 17.86 Mpps
Switching capacity
24.0 Gbps 24.0 Gbps
Electrical
PoE power per port (watts)
NA At 40° C or less, an average of 8.3 W per port. Up to 15.4 W for Class 3
support on any port up to a system maximum of 100 watts of PoE power.
Total system PoE power decreases 2.16 W per ° C increase over 40° C.
IEEE 802.3af Compliant
NA Yes
Management
NMS Policy Manager, Automated Security Manager
(additional license), command line interface, web browser
NMS Policy Manager, Automated Security Manager (additional license),
command line interface, web browser
Physical Specs
Dimensions (HxWxD)
1.60x8.25x8.50 in / 4.06x20.9x21.5 cm 1.60x8.25x8.50 in / 4.06x20.9x21.5 cm
Net Weight (g/lb)
3.65 lb / 1.66 kg 4.02 lb / 1.82 kg
MTBF (Hrs)
105,347 82,532
Thermal Output (BTUs/Hr)
86.35 (BTUs/Hr) 107.5 (BTUs/Hr)
Environmental Specifications
Power Requirements
Input Voltage
100-240 VAC 100-240 VAC
Input Frequency
50-60 Hz 50-60 Hz
Input Current
2.0 A 3.2 A
Power Consumption (watts)
25 W 31.5 W
Temperature
Operating Temperature (C/F)
0-60° C / 32-140° F 0-50° C / 32-122° F
Non-Operating/Storage
Temperature (C/F)
-40-70° C / -40-158° F -40-70° C / -40-158° F
Humidity
Operating Humidity
5%-95% non-condensing 5%-95% non-condensing
Agency & Standards
Specifications
Standard Safety (UL)
UL/CB/LVD UL/CB/LVD
Electromagnetic Compatibility
Standard EMC
CE / FCC Class A / VCCI / C-Tick /BSMI CE / FCC Class A / VCCI / C-Tick /BSMI
Vibration
Non-Operational Shock and Drop
ISTA 2A ISTA 2A

Enterasys D2G124-12 Specifications

General

Brand	Enterasys
Model	D2G124-12
Category	Network Router
Language	English