Enterasys RoamAbout RBT-4102 Installation Guide

Specifications
C-2
Modulation Type
802.11a: BPSK, QPSK, 16-QAM, 64-QAM
802.11g: CCK, BPSK, QPSK, OFDM
802.11b: CCK, BPSK, QPSK
Network Configuration
Infrastructure
Operating Frequency
802.11a:
RBT-4102, RBT-4102-BG, RBT-4102-EU:
5.15 ~ 5.35 GHz US/Canada, Europe, Japan
5.470 ~ 5.725 GHz (Europe)
5.725 ~ 5.825 GHz US/Canada
4.92 ~ 4.98 GHz Japan
5.04 ~ 5.08 GHz Japan
RBT-4102C, RBT-4102C-EU:
5.15 ~ 5.25 GHz US/Canada, Europe, Japan
5.25 ~ 5.35 GHz Japan
5.725 ~ 5.825 GHz US/Canada
4.92 ~ 4.98 GHz Japan
5.04 ~ 5.08 GHz Japan
802.11b/g:
2.4 ~ 2.4835 GHz (US, Canada, ETSI)
2.4 ~ 2.497 GHz (Japan)
AC Power Adapter
Input: 100-240 AC, 50-60 Hz
Output: 48 VDC, 0.38 A
Unit Power Supply
DC Input: 48 VDC, 0.38 A maximum
Input voltage: 48 volts, 0.27 A, 12.95 watts
Power consumption: 9.6 W maximum
PoE (DC)
Input voltage: 48 volts, 0.27A, 12.95 watts
Note: Power can also be provided to the access point through the Ethernet port based on
IEEE 802.3af Power over Ethernet (PoE) specifications. When both PoE is provided
and the adapter is plugged in, AC power will be turned off.

Enterasys RoamAbout RBT-4102 Specifications

General

Brand	Enterasys
Model	RoamAbout RBT-4102
Category	Wireless Access Point
Language	English