REMOTE CONTROL GUIDE EMEA
NOVA
8
KEYS PUNCH THROUGH SETUP PROCEDURES
By default, a key pressed on the remote control is sent to the
selected device mode only. The punch through function al-
lows specic keys to be sent to a particular device. (For exam-
ple, the volume +/- key may need to be sent to the AUX device
instead of the TV).
1. On the remote control, press and hold the “SETUP” key
until the LED blinks twice.
2. Press number keys “9” - “7” - “8”.
3. Press source device mode, e.g. TV.
4. Press keys to punch through, e.g. VOL + / -, MUTE.
5. Press target device modes, e.g. STB, DVD.
6. Press and hold the “SETUP” key until the LED blinks twice.
7. LED has a long blink in case of error.
RESET PUNCH THROUGH PROCEDURES
1. Press and hold the “SETUP” key until the LED blinks twice
2. Press keys “9” - “7” - “8”
3. Press and hold the “SETUP” key until the LED blinks twice.
4. LED has a long blink in case of error.
RESET PROCEDURES
1. Press and hold the “SETUP” key until the LED blinks twice
2. Press keys “9” - “7” - “7”
3. Press and hold the “SETUP” key until the LED blinks twice.
4. LED has a long blink in case of error.
To Next Page
Loading...