REMOTE CONTROL GUIDE EMEA
NOVA
10
APPENDIX TROUBLESHOOTING
Problem Solution
The LED does not blink when a
key is pressed
Replace the batteries with two (2) new
AA batteries
LED blinks when key is pressed
but TV or STB does not
respond
Make sure you are aiming the remote
control at your device and that you are
within 25 feet of the device you are trying
to control
The remote control does not
control TV functions
Follow “Controlling your tv” on page 5 to
program the remote to control your TV
The LED blinks 5 times with each
key press
The batteries need replacement.
Replace the batteries
To Next Page
Loading...
Need help?
General
