REMOTE CONTROL GUIDE EMEA
NOVA
6
PROGRAM REMOTE TO CONTROL YOUR DEVICES
You can program the Nova to control other devices by
1. Locate the device code for your device in the Device Codes
table provided in the Appendix starting on page 11. If
you cannot nd the device code for your device or it does
not work after trying the listed device codes for your de-
vice brand, then you can try the auto search on page 7.
2. Turn on your device.
3. On the remote control, press the Device Control key (TV /
STB / DVD / AUX) to choose the device mode.
4. Press and hold the “SETUP” key until the LED light blinks
twice.
5. Enter the ve-digit device code for your device. If you
perform this procedure correctly, the LED will brink twice.
Otherwise, it has a long blink.
6. Press “Power” key. If your device turns o, setup is com-
plete.
7. If your device does not turn o, repeat this procedure us-
ing the next code for your device brand.
Record working codes here
TV code
DVD code
AUX code
To Next Page
Loading...