Entone Nova - Automatic Device Code Search

REMOTE CONTROL GUIDE EMEANOVA
7
AUTO SEARCH PROCEDURES
If your device does not respond to the remote control after
trying all device codes listed for your brand, or if your brand is
not listed, try searching for your device code as follows:
1. Turn on your device.
2. On the remote control, press the corresponding Device
Control key (TV / DVD / AUX) to choose the device mode.
3. Press and hold the “SETUP” key until the LED light blinks
twice.
4. Press number keys “9” - “9” - “1”.
5. Press “Power” key.
6. Press “CH +” key repeatedly until your device turns o.
7. Press and hold “SETUP” key until LED blinks twice to save
the working code.