Service
Regular inspections byatrainedandqualifiedperson,and the frequency of service occasions, should
at minimum be made according to national regulations or industry standard, in the absence of a
national regulation. This is especially important when the installation concerns a fire-approved door
or a door with an emergency-opening function. To extend the life of your investment and ensure
safe and reliable operation of the door, we recommend a minimum of 2 visits per year or more, de-
pending on usage and operating conditions. Environmental aspects shall also be considered.
Talk to your Entrematic Nordic representative to learn more about our service offering.
Intended use
The EM EMSW EMO is an automatic swing door operator developed to make life easier for everyone
who can benefit from automatic doors. The EM EMSW EMO is a low-energy operator using a DC
motor and a gear-reduction system to drive an arm system, which opens the door. It is to be installed
indoors where it is suitable for almost all types of external and internal swing doors. This widely-used
operator can be found in applications in health care, residential, office and public buildings.
The door is designed to offer continuous use, a high degree of safety and maximum lifetime. The
system is self-adjusting to the effects caused by normal variations in the weather conditions and to
minor friction changes caused by e.g. dust and dirt.
For escape in emergency situations the doorset is opened manually.
For installation and maintenance see Installation and Service manual 1005088.
Save these instructions for future reference.
Technical specification
Entrematic Nordic ABManufacturer:
Lodjursgatan 10, SE-261 44 Landskrona, SwedenAddress:
EM EMSW EMOType:
100-240 V AC +10/-15%, 50/60 HzMains power supply:
Max. 75 WPower consumption:
IP20Class of protection:
Third party approvals from established certification organizations valid
for safety in use, see Declaration of Incorporation.
Approvals:
5Issue 2016-06-211005099-EMEI-9.0
To Next Page
Loading...
