EasyManua.ls Logo

Entrematic Ditec HA7 - User Manual

Entrematic Ditec HA7
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation and Service Manual
Swing
Door Operator
Ditec HA7
Trusted brands. Great products.

Questions and Answers

  • S
    smithandrewAug 4, 2025
    Why Entrematic Ditec HA7 Door Opening System does not open?
    • G
      George SummersAug 4, 2025
      If your Entrematic Door Opening System isn't opening, first, check that the control switch isn't set to OFF and change the setting of the control switch. If the switch is correctly set, check the mains power and the fuse in the building to ensure the system is receiving power.
  • W
    William JonesAug 15, 2025
    What to do if Entrematic Door Opening System does not close?
    • D
      Deborah UnderwoodAug 15, 2025
      If your Entrematic Door Opening System isn't closing, make sure the control switch isn't set to HOLD and change the setting of the control switch. Also, check for any obstructions that may be jammed beneath the door and remove them.
  • B
    Bonnie DavisAug 25, 2025
    How to troubleshoot Entrematic Door Opening System when motor starts but the door doesn't open?
    • Z
      zjohnsonAug 26, 2025
      If the motor of your Entrematic Door Opening System starts but the door remains closed, consider these possibilities: 1. The mechanical lock is engaged: Unlock it. 2. An object is obstructing the door's path: Remove it. 3. The electric striking plate is binding: Select lock release. 4. Striking requires adjustment: Adjust striking. 5. The arm system has loosened: Tighten the arm system by following the installation steps.

Summary

Safe Operation Instructions

Important Information and Safety

Safety Precautions

Emphasizes strict adherence to manual instructions for installation, adjustment, and repairs for safety.

Technical Specifications

Permitted Door Weight and Width

Provides a guide for door weight and width limits for the Ditec HA7 operator, including graphical data.

Ditec HA7 Operation

App Modes and Functions

Details various operational modes, functions, and controls available via the mobile app.

Pre-installation Guide

Mechanical Installation

PUSH Arm System Installation

Details steps for determining door hand and mounting components for PUSH arm systems.

PULL Arm System Installation

Details steps for determining door hand and mounting components for PULL arm systems.

Electrical Connection

Mains Connection

Explains the procedure for connecting the main power supply to the operator unit.

Start-up and Configuration

Spring Pre-tension Adjustment

Explains how to adjust spring pre-tension based on door closer power size and weight.

App Setup and Configuration

Guides on installing, logging into, and configuring the Entrematic Swing Door Manager app.

Troubleshooting

Entrematic Ditec HA7 Specifications

General IconGeneral
Closing SpeedAdjustable
Motor voltage24V DC
Operating temperature-20°C to +55°C
Protection classIP44
Power Supply230V AC, 50/60Hz
Opening SpeedAdjustable
Control SystemMicroprocessor control
Safety FeaturesObstacle detection

Related product manuals