Entrematic Ditec HA7 - Parameter Configuration

44
Issue 2020-08-31
1021444-2.0
12 Start-up
12.2.9 Configuration parameters
Parameter name Default settings Value
Hold open time 5s 2s- 6h
Opening time 4.5s 4.5s - 9s
Closing time 4.5s 4.5s - 9s
Arm system Push Push / Pull
Push and go Not active Not active / Active
Power assist Off Off / Low / Medium / High
Extend closing torque 0 (Lowest) 0 (Lowest) - 10 (Highest)
Stop on stall Active Not active / Active
Select lock voltage 12V 12V / 24V
Select lock power Lock with power Lock with power / Lock without power
Push and close Not active Not active / Active
Key impulse hold open time 5s 2s - 25s
Number of lock retries 1 time 0 - 2 times
Lock kick Not active Not active / Active
Reverse upon obstruction Active Not active / Active
Lock release time 0.5s 0s- 5s
Ratchet function Not active Not active / Active