Entrematic EM - Page 8

FUNCTION AND VISUAL INSPECTION
6
7
10
12
8
3
3
4
3
11
13
9
5
1
2
4
3
14
CLEANING
The best way to remove dust and dirt from the EM EMSW EMO is to use water and a soft cloth or a sponge.
A gentle detergent may be used. To maintain the quality of the enamel layer, the surfaces should be cleaned
once/four months period. The cleaning should be documented. To avoid damages to the profiles the
brushes/weather stripping must be vacuum-cleaned weekly.
• Do not expose windows, doors or profiles to alkalis. Both aluminium and glass are sensitive to alkalis.
• Do not clean with high pressure water. Operator, programme selector and sensor may be damaged and
water may enter the profiles.
• Do not use polishing detergent.
• Do not scrub with materials like Scotch-brite, as this will cause mechanical damage.
1005099-EMEI-9.0Issue 2016-06-218