Entron EN1000 series Instruction Manual

Page 59
710257A
TROUBLE
POSSIBLE CAUSE
REMEDY
____________________________________________________________________________________
Inconsistent Welds I.
Varying air pressure.
II
Work not square with elec-
trodes.
III.
Poor part fit-up.
IV.
Dirty material to be welded.
1.
Check air supply and accessories.
1.
Check welding fixtures set-up or
electrode alignment.
1.
Check parts for proper fit-up.
1.
Work should be free from
excessive dirt, paint and oxides.

Entron EN1000 series Specifications

General

Brand	Entron
Model	EN1000 series
Category	Controller
Language	English