Entrust Sigma DS1 - Multi-Hopper Printer; Operating Environment

6 Printer Installation
Multi-Hopper Printer
Operating Environment
Use the following guidelines when operating the printer:
Operating temperature 60°–95° F (15°–35° C)
Operating humidity 20–80%, non-condensing
19.0 in
482 mm
6.1 in
155 mm
5.6 in
142.9 mm
4.2 in
108 mm
28.6 in
729 mm
9.0 in
229 mm
7.1 in
181 mm
11.2 in
284 mm