Getting Started
Start by connecting the power pack to the DMXStreamer, switch it
on. The LCD screen will light up and the product name and version
number will appear.
The DMXStreamer will probably display NO TIME SET, meaning
you have to set the time for the first time.
Setting the time
To set the time:
1-Press SCROLL until you select the Setup menu
2-Press ENTER
3-Press SCROLL until you select Set Time
4-Press ENTER
5-Press SCROLL to select the the current hour
6-Press ENTER
7-Press SCROLL to select the the current minute
8-Press ENTER
9-Press SCROLL to select the the current second
10-Press ENTER
The time is set.
To go back up to the top menu press MENU
You can also set the date in the same way you set the time.
Now connect the DMX512 network to the DMX OUT connector of
the DMXStreamer and your lighting console to the DMX IN
DMXStreamer User Manual 12
To Next Page
Loading...