2-5 Frame Rate
This menu will let you select the recording frame rate for this show.
The frame rate can vary between 10 and 40 frames/sec.
A higher frame rate will use more memory but fades will be
smoother. You will have to find the setting that best suits your needs.
The default frame rate is 25 frames per second. The majority of
lighting control systems do not generate more than 25 frames per
second, so keeping the default value will yield the best results.
2-8 Number of Channels
This menu will let you select how many DMX channels the
DMXStreamer should record at each frame. Setting this to 64 will
record the first 64 channels of the DMX input. Only record the
channels you are actually using. Storing the full 512 byte frame each
time uses a lot of very memory space.
3-Playlist
The Playlist in the DMXStreamer has 100 entries, each entry
contains a : show, start and stop time.
3-1 Edit
This menu will let you select the playlist entry you want to edit.
To select the show simply press ENTER, and use SCROLL to select
the desired show. Press ENTER to edit or MENU to cancel.
While scrolling the DMXStreamer will display in short form the
show number, start and show start and stop time associated with each
entry. To edit that entry press ENTER
DMXStreamer User Manual 16
To Next Page
Loading...