4-2 Set Time
This menu can be used to set the system time
4-3 Set Date
This menu can be used to set the system date
4-4 Local time
This menu can be used to set your current time zone, this is
necessary for sunrise/sunset scheduling.
4-5 Latitude
This menu can be used to set the latitude of your current
locations, this is necessary for sunrise/sunset scheduling.
4-6 Longitude
This menu can be used to set the longitude of your current
locations, this is necessary for sunrise/sunset scheduling.
4-7 Start Frame
You can set the DMX frame that is used as default when the unit
powers up.
This can be very useful to strike lamps or perform any one-off task.
To program this frame, press ENTER to select the menu, the
DMXStreamer will indicate if it has a valid DMX512 signal on the
input. To capture that frame press ENTER.
The DMXStreamer will record that frame in memory and use it each
time it starts up.
DMXStreamer User Manual 19
To Next Page
Loading...