EasyManuals Logo

Envertech EVT800-B User Manual

Envertech EVT800-B
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
14
1. Turn off AC branch circuit breaker.
2. Disconnect the microinverters in the following procedure.
Pull the AC connectors of both sides of the microinverters in the opposite
direction with appropriate force.
3. Cover the PV module with an opaque, and then disconnect the PV module DC
connectors from the microinverter.
4. Loosen the grounding screw and remove the grounding wire.
5. Take off the microinverter from the PV frame.
9. System Diagram
1. Single phase
2. Three-phases
Unscrew the front cover with the complimentary hex screwdriver, then
plug wires on each phase into the corresponding connector of EVB300.
10. Recycling and Disposal
In order to comply with the regulations on recycling management of electrical
and electronic wastes in various countries, electrical equipment’s that have
reached its lifetime must be collected separately to the unit or individual that
has obtained the qualification for disposing discarded electrical and electronic
products. For any equipment that you no longer use, please return it to your
Distribution
control box
Grid
5
Extention cable 4mm2
7
Router
4
RJ45 Cable
6
socket
2
Microinverter
12
User Identific a tion Number
-40
to +65
Temperature(
):
Operating Range (Vdc):
16V~60V
Normal Voltage?(Vac):
220/230V
MPPT Voltage Range (Vdc):
22V~48V
Current (Max. Continuous) (A):
3.27A
Max. DC Input (Vdc):
60V
Frequency?(Hz):
50Hz/60Hz
Max. Input Continuous Current?(A):
12Ax2
Power Factor Range:
+/-0.90
Max. Input Short-Circuit Current (A):
15AM ax imu m U nit s Per Branch: 6
Power (Max. Continuous) (W):
720W
Overvoltage Category:OVC III (AC Main) , OVC II ( PV)
Ingress Protection (IP):
IP67P rotect ive Cl ass : Class I
Model: EVT800
www.envertec.com
Zhejiang Envertech Corporation Lt d.
PV Microinverter
1
PV Module
1
PV Module
Distribution
control box
Grid
7
Router
RJ45 Cable
4
5
Junction Box
8
Extention cable 4mm2
2
Microinverter
12
User Identification Number
-40 to +65
Temperature(
Operating Range (Vdc):
16V~60V
Normal Voltage?(Vac):
220/230V
MPPT Voltage Range (Vdc):
22V~48V
Current (Max. Continuous) (A):
3.27A
Max. DC Input (Vdc):
60V
Frequency?(Hz):
50Hz/60Hz
Max. Input Continuous Current?(A):
12Ax2
Power Factor Range:
+/-0.90
Max. Input Short-Circuit Current (A):
15AMaximum Units Per Branch: 6
Power (Max. Continuous) (W):
720W
Overvoltage Category: OVC I I I ( AC M a in ), OVC II ( PV)
Ingress Protection (IP):
IP67Protec tive Class: Class I
Model: EVT800
www.envertec.com
Zhejiang Envertech Corporation Ltd.
PV Microinverter
1
PV Module
1
PV Module
2
Microinverter
12
User Identification Number
-40 to +65
Temperature(
Operating Range (Vdc):
16V~60V
Normal Voltage?(Vac):
220/230V
MPPT Voltage Range (Vdc):
22V~48V
Current (Max. Continuous) (A):
3.27A
Max. DC Input (Vdc):
60V
Frequency?(Hz):
50Hz/60Hz
Max. Input Continuous Current?(A):
12Ax2
Power Factor Range:
+/-0.90
Max. Input Short-Circuit Current (A):
15AMaximum Units Per Branch: 6
Power (Max. Continuous) (W):
720W
Overvoltage Category: OVC I I I ( AC M a in ), OVC II ( PV)
Ingress Protection (IP):
IP67Protec tive Class: Class I
Model: EVT800
www.envertec.com
Zhejiang Envertech Corporation Ltd.
PV Microinverter
1
PV Module
1
PV Module
2
Microinverter
12
User Identification Number
-40 to +65
Temperature(
Operating Range (Vdc):
16V~60V
Normal Voltage?(Vac):
220/230V
MPPT Voltage Range (Vdc):
22V~48V
Current (Max. Continuous) (A):
3.27A
Max. DC Input (Vdc):
60V
Frequency?(Hz):
50Hz/60Hz
Max. Input Continuous Current?(A):
12Ax2
Power Factor Range:
+/-0.90
Max. Input Short-Circuit Current (A):
15AMaximum Units Per Branch: 6
Power (Max. Continuous) (W):
720W
Overvoltage Category: OVC I I I ( AC M a in ), OVC II ( PV)
Ingress Protection (IP):
IP67Protec tive Class: Class I
Model: EVT800
www.envertec.com
Zhejiang Envertech Corporation Ltd.
PV Microinverter
1
PV Module
1
PV Module
WARNING:
Do not attempt to repair the Envertech microinverter. It
contains no user-serviceable parts. If the microinverter fails,
contact your direct supplier or Envertech customer service to
obtain an RMA (return merchandise authorization) number
and start the replacement process.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Envertech EVT800-B and is the answer not in the manual?

Envertech EVT800-B Specifications

General IconGeneral
BrandEnvertech
ModelEVT800-B
CategoryInverter
LanguageEnglish

Related product manuals