EasyManuals Logo
Home>Envirovent>Fan>PIV AIR SOURCE

Envirovent PIV AIR SOURCE Installation Guide

Envirovent PIV AIR SOURCE
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
PIV & MIV Air Source / Inline
01423 859 395
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
9
In conditions between 19°C - 25°C the units will increase air flow rate
by 10%. In hot conditions above 25°C the units will temporarily switch
off to avoid bringing hot air into the property from the loft space.
The PIV unit uses a single 200mm diffuser to provide air into a hallway
or landing area.
The MIV unit uses two 100mm diffusers to provide airflow to separate
locations within the building. It is normally required for applications
where:
a) The hallway is small.
b) Limited heating is available.
c) The loft hatch fills the hallway ceiling.
d) Airflow is required in a remote area such as a bedroom.
Option 1
If a higher airflow is required in the hallway, position
that diffuser a shorter distance from the unit.
Other room
(lower flow rate)
Hallway
(higher flow rate)
Option 2
If a similar airflow is required in the hallway, position
both diffusers at similar distances from the unit.
Other room
(similar flow rate)
Hallway
(similar flow rate)

Other manuals for Envirovent PIV AIR SOURCE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Envirovent PIV AIR SOURCE and is the answer not in the manual?

Envirovent PIV AIR SOURCE Specifications

General IconGeneral
BrandEnvirovent
ModelPIV AIR SOURCE
CategoryFan
LanguageEnglish

Related product manuals