Envirovent PIV AIR SOURCE Installation Guide

PIV & MIV Air Source / Inline
01423 859 395
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
7
PIV Air Source box contents
• 1x PIV Air Source unit
• 1x Loft Filter (not on air inline
unit)
• 2x Flexible filter rods (not on air
inline unit)
• 1x 150mm Inline filter
• 1x 200mm diffuser (+ 2x
blanking plates)
• 1x Instruction guide
• 1x Diffuser mounting template
• 1x Flexible duct (1m x 200mm
dia.)
• 1x Unswitched fuse spur
• 1x Heater switch (Standard
units)
• 1x Remote control (Remote
Control units)
• 8x Foam pads
• 4x Washers
• 4x Screws 10g x 3”
• 4x Screws 10g x 1.5”
• 4x Screws 8g x 1.5” (panhead)
• 4x Screws 8g x 1” (countersunk)
• 4x Plasterboard plugs
• 2x 200mm duct fixings
• 1x 150mm duct fixing
MIV Air Source box contents
• 1x MIV Air Source unit
• 1x Loft Filter (not on air inline
unit)
• 2x Flexible filter rods (not on air
inline unit)
• 1x 150mm Inline filter
• 2x 100mm diffusers
• 1x Instruction guide
• 2x Flexible ducts (3m x 100mm
dia.)
• 1x Unswitched fuse spur
• 1x Heater switch (Standard
units)
• 1x Remote control (Remote
Control units)
• 8x Foam pads
• 4x Washers
• 4x Screws 10g x 3”
• 4x Screws 10g x 1.5”
• 4x Screws 8g x 1.5” (panhead)
• 4x Screws 8g x 1” (countersunk)
• 4x Plasterboard plugs
• 4x 100mm duct fixings
• 1x 150mm duct fixing

Envirovent PIV AIR SOURCE Specifications

General

Brand	Envirovent
Model	PIV AIR SOURCE
Category	Fan
Language	English