Envision G2770 User Manual

OSD Setup
H. Position 0-100 Adjust the horizontal position of OSD
V. Position 0-100 Adjust the vertical position of OSD
Timeout 5-120 Adjust the OSD Timeout
Transparence 0-100 Adjust the transparence of OSD
Language Select the OSD language
Extra
Auto Select to Auto Detect input signal
D-SUB
Select Analog Signal Source as Input
Input Select
DVI
Select Digital Signal Source as Input
Auto Config yes or no Auto adjust the picture to default
Image Ratio wide or 4:3 Select wide or 4:3 format for display
DDC-CI yes or no Turn ON/OFF DDC-CI Support
Information
Show the information of the main
imag
e and s
ub-image source
Reset
Reset yes or no Reset the menu to default
Exit
Exit Exit the main OSD
Notes:
1)If the product
has onl
y one signal input, the item of "Input Select" is disable to adjust.
2)If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is
disalbe to adjust.
3)One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off
accordingly.
13
Off Timer 0-24 hrs Select DC off time

Envision G2770 Specifications

General

Brand	Envision
Model	G2770
Category	Monitor
Language	English