28
FM Transmit
This function is to broadcast the audio files on the unit to your car radio via FM transmit.
Setup Steps:
Quick reference:
① Turn on/off FM transmit.
② Tap to select and transmit the frequency; tap and hold for 2
seconds to store the current frequency channel in the
corresponding position.
③ Current frequency. Frequency range is 76-108MHz.
④ Tap to lower the frequency by 0.1MHz. Tap and hold for 2
seconds to continuously lower the frequency. Tap again to stop.
⑤ Tap to increase the frequency by 0.1MHz. Tap and hold for 2
seconds to continuously increase the frequency. Tap again to stop.
1. Turn on FM transmit and select the frequency.
2. Turn on the FM radio of your car radio and tune into the same frequency.
1
4 3 5
2
To Next Page
Loading...
