ep EPL185 - Comissioning

REV. 09/2020
A10
The truck must only be operated on battery current!
To prepare the truck for operation after delivery or transportation, the following operations must be
performed:
Check the equipment for completeness.
If necessary, install the battery. Make sure that the battery cable is not damaged.
Fully charge the battery.
Check for Fluid Leakage.
Check the brake function.
Check the lifting and lowering function.
Check the driving function.
Check the steering function.
The truck can now be started, see 1.2.3 Truck starting chapter B
Thetruckmustonlybeoperatedwithalithium-ionbattery.
1.4.2 Comissioning
WARNING
Wheel attening
If the truck has been parked for a long period, the wheel surfaces may tend to
atten. This attening has a negative e󰀨ect on the safety and stability of the truck.
Once the truck has covered a certain distance, the attening will disappear.
Ifthetruckisdeliveredinmultipleparts,setupandcommissioningmustonlybeperformedby
trained,authorisedpersonnel.
i
NOTE