EasyManua.ls Logo

Epelsa ECO MULTIFUNCTION - Programming Levels (Under-Target-Over)

Epelsa ECO MULTIFUNCTION
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GBS-ECO-MF-V02
24
d.-] Weight request:
Communication format:
Computer
request
Scale answer
<$>(0x24, 36d)
The scale transmits the weight with the
following trace:
<PPP.PPP><CR>
Scale answer:
<PPP.PPP> - Value of the net weight with 7 bytes including the
decimal point and left-justified with zeros (0x30)
<CR> - Character 0x0d.
Special cases of this protocol:
d.1.-] Net weight zero and stable: Sends '0000000<CR>'
d.2.-] Net weight over or under: Sends 'AAAAAAA<CR>'
d.3.-] Net weight in range and stable: Sends 'PPP.PPP<CR>' (the value of
the weight with 7 bytes including the decimal point and justified with zeros
on the left.
d.4.-] Net weight in range, stable and negative: Sends the string described
in section 'd.2.-]'.
d.5.-] Net weight in range and unstable: The scale retains the weight
request indefinitely until it becomes stable, when the scale operates as
described in section 'd.3.-]'.
Transmission started by the scale at the beginning
a.-] When the scale is powered on and the initial sequence is completed, it
indicates that it is ready by sending the sequence: '0000000<CR>', described
previously.

Other manuals for Epelsa ECO MULTIFUNCTION