Need help?Do you have a question about the Epever Epsolar eBox-WIFI-01 and is the answer not in the manual?
General| Model | eBox-WIFI-01 |
|---|---|
| Communication Method | WiFi |
| Interface | RS485 |
| Protection Grade | IP30 |
| Type | WiFi Communication Module |
| Compatibility | Epever solar charge controllers |
| Baud Rate | 9600 bps |
| Power Consumption | 0.5W |
| Communication Distance | Up to 100m (open space) |
Connect the e-Box-WIFI to the RJ45 port on the MPPT Epever device.
Turn on the MPPT controller and wait for the green Power LED.
Contains a prominent 'Danger Electricity' warning regarding wiring.
Download the app file, install it, and grant necessary permissions.
Connect your phone to the Wi-Fi network created by the eBox-WIFI device.
Navigate the app to select the controller and access device settings.
Use 'Read' to load MPPT data and 'Send' to save changes in device settings.
Synchronize the MPPT controller's time with your phone's time.
Access battery settings, read current values, and send modifications.
View recommended settings for KS2 Corp batteries and contact for other capacities.
View overall device activity and press elements for detailed readings.
Access specific real-time readings for photocell, battery, and load parameters.
To Next Page