Need help?Do you have a question about the Epever XTRA1206 G3 and is the answer not in the manual?
General| Brand | Epever |
|---|---|
| Model | XTRA1206 G3 |
| Category | Controller |
| Language | English |
Provides essential safety guidelines for installation and operation of the controller.
Provides a general overview of the XTRA-N G3/G3 BLE series controllers.
Details the features and physical characteristics of the controller.
Explains the product naming conventions for the XTRA series.
Illustrates the basic wiring for battery and no-battery modes.
Details various protection mechanisms built into the controller.
Provides solutions for common issues and errors.
Outlines recommended maintenance procedures for optimal performance.
Details the electrical specifications and ratings of the controller models.
Details the physical dimensions and mounting information for the controller.
Details the operating and storage conditions for the controller.
Important precautions to be taken before and during installation.
Specifies the requirements for connecting PV modules to the controller.
Details the recommended wire sizes for PV, battery, and load connections.
Provides instructions and guidelines for mounting the controller.
Explains the meaning of various LED indicators on the controller.
Details the function of each button on the controller interface.
Describes the icons and information shown on the controller's LCD screen.
Guides through the process of setting various operational parameters.
Explains how to select and configure different battery types.
Details how to set the battery capacity for accurate monitoring.
Explains how to set the temperature units (°C or °F).
Describes how to adjust the screen refresh rate or cycle time.
Instructions on how to reset the accumulated energy data.
Guides on enabling or disabling the RS485 communication port.
Details how to configure the load output type.
Covers settings related to battery type, capacity, and voltage parameters.
Lists the battery types compatible with the controller.
Explains how to set battery parameters directly on the controller.
Details how to set battery parameters remotely via PC software or APP.
Guides setting parameters via external WiFi, Bluetooth modules, or built-in Bluetooth.
Explains parameter setting using the MT52 remote meter.
Details the battery voltage parameters for different battery types.
Guides through setting load modes via the LCD interface.
Details various load operating modes like Light ON/OFF and timers.
Configuration details for RS485 communication interface.
Manual control and Light ON/OFF modes for RS485 communication.
To Next Page