EPH Controls COMBIPACK4 - To disconnect the RFRP-OT thermostat from an RF1 A-OT receiver; On the RFRP-OT thermostat; On the RF1 A thermostat

52
CombiPack4
This can be done from either the thermostat or the receiver.
To disconnect the RFRP-OT thermostat
from an RF1A-OT receiver
On the RFRP-OT thermostat:
Press the
button. The thermostat will begin to search through the
RF channels.
Press and hold the
COPY
button for 10 seconds. ‘Adr’ will appear on the
screen of the thermostat.
Press the
OK
button twice to complete the unpairing process. The
thermostat RFRP-OT is now disconnected from the receiver RF1A-OT.
On the RF1A thermostat:
Press the
Connect
button, the red light will ash.
Red & green lights if using as a hub receiver.
Press and hold connect for about 10 seconds, the receiver will then
stop ashing.
The RF connection is now cleared.