Need help?Do you have a question about the EPH Controls CP4M and is the answer not in the manual?
General| Control Mode | On/Off |
|---|---|
| Contact Voltage | 230VAC |
| Type | Programmable |
| Mounting | Wall-mounted |
| Contact Current | 3A |
| Temperature Range | 5°C to 30°C |
| Operating Mode | 7 Day Programmable |
Illustrates electrical connections for mains voltage output, including terminal COM, OFF, and ON.
Provides instructions and safety precautions for mounting the thermostat, including mounting height and location.
How to temporarily adjust the temperature setpoint from AUTO mode until the next programmed change.
How to switch to MAN mode for a permanent temperature override, bypassing programmed schedules.
Configure modes: Normal, Optimum Start (OS), and TPI for heating control.
Set the minimum and maximum temperature ranges the thermostat can operate within.
Adjust the switching differential (HON/HOFF) for temperature control accuracy.
Introduction to the PIN lock feature and its basic functionality.
Step-by-step instructions for setting a new PIN for the thermostat.
Procedure for unlocking the thermostat when a PIN is active.
To Next Page
