EPH Controls CP4M - Setting the PIN Code

33
EPH Controls Ltd.
Set up the PIN
Press and hold
PROG
and
OK
, ‘P01’ will appear on the screen.
Press
until ‘PIn’ appears on the screen. Press
OK
, ‘OFF’ will appear.
Press to change from OFF to ON. Press
OK
. ‘01’ will be appear.
Press
and to choose between options 01 and 02.
Press
OK
button.
‘ ’
will ash on the screen.
Press
and to set the value from 0 to 9 for the rst digit.
Press
OK
to move to the next PIN digit. When the last digit of the PIN is
set, Press
OK
.
‘VErIFy’ is displayed with
‘
’
.
Press
and to set the value from 0 to 9 for the rst digit.
Press
OK
to move to the next PIN digit. When the last digit of the PIN is
set, Press
OK
.
The PIN is now veried, and the PIN lock is activated.
If the verication PIN is entered incorrectly the user is brought back to the
menu.