EPH Controls CP4M - Boost Function

22
CP4M
The thermostat can be boosted to a specic temperature for 1, 2 or 3
hours while the thermostat is operating in all modes except for holiday
mode.
Press the
BOOST
button 1, 2 or 3 times, the time that the boost will be
activated to will ash on the screen.
If you do not press any other button the boost will activate to the
temperature displayed on the screen after 5 seconds.
If you press the
OK
button the temperature will now ash. You can edit
the temperature if you press the or buttons.
Press the
OK
button or wait for 5 seconds for the boost to activate.
‘BOOST TO’ will now be displayed on the screen with the time that it is
activated to displayed above this text.
Press the
BOOST
button again to deactivate the boost.
Boost Function