EPH Controls CP4M - Temporary Temperature Override; Permanent Temperature Override

21
EPH Controls Ltd.
When in AUTO mode, press the or buttons to adjust the
temperature setpoint. ‘OvEr’ will appear on the screen.
Press
OK
or after 5 seconds the thermostat will operate in this
temperature, until the next switching time.
To cancel temporary override, press the
OFF
buttton and then press the
AUTO
button to return to the automatic mode.
Press the
MAN
button to enter the manual mode (Permanent Override),
‘MAN’ will appear on the screen.
Press the or buttons to adjust the temperature setpoint.
Press
OK
or after 5 seconds the thermostat will operate in this
permanent override.
To cancel permanent override, press the
OFF
buttton and then press
the
AUTO
button to return to the automatic mode.
Temporary Override
Permanent Override