35
EPH Controls Ltd.
To Deactivate the PIN
When the PIN is unlocked (see above instructions)
Press and hold
PROG
and
OK
, ‘P01’ will appear on the screen.
Press
until ‘P06 PIn’ appears on the screen.
Press
OK
, ‘ON’ will appear on the screen.
Press
or to select ‘OFF’. Press
OK
.
‘
’
will ash on the screen. Enter the PIN. Press
OK
.
The PIN is now disabled.
Press
AUTO
to return to normal operation or it will automatically exit after
20 seconds.
This menu allows the installer to return to the main interface.
It is also possible to exit the installer menu by pressing
AUTO
,
MAN
or
OFF
whilst in the installer menu.
Exit
To Next Page
Loading...
