EPH Controls CP4M - PO 4: Thermostat Calibration; PO 5: Frost Protection Control; PIN Function Introduction

32
CP4M
PO 4 Calibration
This menu allows the installer to re-calibrate the thermostat. The
current temperature will be displayed on the screen and can be
adjusted by pressing the or buttons .
This menu allows the installer to activate or de-activate frost protection.
When frost protection is activated the thermostat will switch on the
boiler when the temperature drops below 5˚C.
PO 5 Frost Protection
5˚C
PIN Function
This menu allows the user to put a PIN lock on the thermostat. The PIN
lock will reduce the functionality of the thermostat.
The user will have two options to choose from:
01: All buttons will be disabled.
02: The only modes available are the AUTO & OFF.