EPLO EP-U8PRO - Maintenance; Main Unit Care and Maintenance; Filter Maintenance; Spray Nozzle Care and Maintenance

16
Maintenance
Spray nozzle care and maintenanceMain unit care and maintenance
Shut off power supply before doing
maintenance.
1. When no one is seated, turn the knob
clockwise. The nozzle will automatically
stretch out to allow access for cleaning.
1.
2.
3.
1.
2.
3.
4.
5.
6.
Use only a soft, damp cloth to clean. Avoid
using harsh chemicals.
Once cleaning is completed and all
surfaces are dry, re-connect the power
plug.
Filter maintenance
If poor spray performance occurs under
normal conditions:
Unscrew angle valve nut
Turn off power and the angle valve
Remove filter net
Clean out the filter net under running
water using a toothbrush
Reinstall filter net and angle valve nut
Turn on the angle valve and connect the
power.
When the nozzle moves forward, the
nozzle can be removed and cleaned
separately.
2.
Use only a soft cloth or soft brush to
clean. Do not pull or push the wand, to
avoid damage.
3.
Put the nozzle back on and press "Stop"
Button to return the spray wand to its
normal position.
4.