13
Equipped with
three-way angle
valve
Check the threaded connection for leaks to ensure complete sealing. Turn the three-way
angle valve counterclockwise to the full open position.
(Note: The three-way angle valve opens with a large torque for the first time.)
Preparation
Turn on the three-way angle valve1.
Self-inspection
Once power is connected, the buzzer beeps and the button lights up. All icons on the
display light up, and the self-inspection starts.
The buzzer of the main unit beeps again, and the self-test is completed, and the indicator
lights of the function icons work as normal. The button lights up.
The product is ready to use.
3.
RESET
REMETTRE
TEST
TEST BEFORE EACH USE
1. PLUG INTO RECEPTACLE
2. PRESS RESET BUTTON:
VISUAL INDICATOR APPEARS.
3. PRESS TEST BUTTON:
VISUAL INDICATOR DISAPPEARS.
4. PRESS RESET FOR USE.
DO NOT USE IF ABOVE TEST FAILS.
WARNING:
Power Connection
Plug in the leakage protection plug to a power socket, press the reset switch, plug
indicator lights up, indicating that the power is on.
Note:
Press the test button prior to usage, the reset
switch pops up indicating that the leakage
protection function is normal.
Press the TEST button (then RESET button)
every month to assure proper operation.
* Only for models with leakage protection plug.
* Please refer to the actual product.
Current detection
test button
Reset switch
Indicator light
2.
To Next Page
Loading...
