For example,
To set the ‘Serial baudrate’ to 38,400bps:
- When in ‘Setting mode’, press the FEED button twice(2), as displayed on the print out, to enter the ‘Serial baudrate’ submenu.
- After 2 seconds, the following options will be printed:
Serial Baudrate:
1. 2400bps
2. 4800bps
3. 9600bps
4. 19200bps
5. 38400bps
6. 57600bps
7. 115200bps
- Find the option that you wish to change the property to, in this instance ‘5-38400bps’, and press the FEED button the corresponding
number of times (i.e. five times)
- After 2 seconds, the new settings will be printed. In this instance:
Baudrate : 38400bps* [ * The current settings are displayed. ]
※ To make any other changes to the printer’s properties, please follow the method above.
To Next Page
Loading...
