EPOS EXPAND SP 30 User Manual

EXPAND SP 30 | EXPAND SP 30 + Bluetooth Speakerphone
Using the Speakerphone 12
Using the Speakerphone
Turning the Speakerphone on/o
Turning the Speakerphone on Turning the Speakerphone o
2s
3x
2s
X Press and hold the Power on/o button.
The LED lights up white.
X Press and hold the Power on/o button.
The LED ashes red 3 times and turns o.
All volume settings are saved automatically when the
speakerphone is turned o.
Connecting Bluetooth® devices
The speakerphone will by default attempt to connect to the two last connected Bluetooth devices. For further information
concerning personal/shared mode functionality see page
22.
3x
X Activate Bluetooth on the paired device(s).
If the Bluetooth LED does not ash blue
(automatic search after switch-on):
X Press the Bluetooth button to connect manually.
The LED ashes blue while the speakerphone attempts
to connect to previously paired Bluetooth device(s).
Once the connection is successfully established, the
LED lights up blue.
i
Only two out of the maximum eight paired Bluetooth devices can be simultaneously connected to the
speakerphone.
The search for paired devices will timeout if no devices are found. After this, connections must be established
manually on the paired Bluetooth device or by pressing the Bluetooth button on the Speakerphone

EPOS EXPAND SP 30 Specifications

General

Brand	EPOS
Model	EXPAND SP 30
Category	Telephone
Language	English