Epson AcuLaser C7000 User Manual

Ready and Error Lights (1/1)
EPSON AcuLaser C7000 Quick Reference
Ready and Error Lights
The ready (green) and error (red) lights on
the top of the printer may be the first
indication of trouble. The status of the lights,
on, off, or flashing, indicates the status of
your printer as described below.
The Status Alert window in the EPSON
Status Monitor 3 utility indicates what type
of error has occurred and offers you a
possible solution. Look through this section
to find the kind of problem you have, then
try the recommended solutions in the order
they are presented until your problem is
solved.
Note:
If the problem remains after trying the
suggestions in this section, contact your dealer
for assistance.
ON Flashing
Flashing slowly OFF
Lights Printer Status
Printer’s power is turned off.
Printer is ready for printing, in
stand-by mode, or printing a job.
Warning indicated for items other
than consumables. To get current
information about the printer,
check the EPSON Status Monitor 3
utility.
Printer is warming up, receiving
data, or adjusting for printing.
ready light
error light
A consumable product is almost
used up. Check the alert message
on the EPSON Status Monitor 3
utility and replace the
consumable with a new one.
There is an error that can be easily
remedied. Check the alert
message on the EPSON Status
Monitor 3 utility for a solution.
The cover of the printer is open,
the printer is out of paper, or paper
is jammed in the printer. When
printing with the duplex unit, make
sure that the paper size setting is
correct.
Flashing
simultaneously
Memory module is not installed or
installed incorrectly in the S0 slot.
See “Memory Module” in the
Reference Guide.
Reference Guide.Reference Guide.
Reference Guide.
A protocol error has occurred. Try
turning off the printer and then
turning it back on. If this does not
clear the error, contact your
dealer or a qualified service
person.
Flashing
alternately
An error has occurred. Try turning
off the printer and then turning it
back on. If this does not clear the
error, contact your dealer or a
qualified service person.

Epson AcuLaser C7000 Specifications

General

Brand	Epson
Model	AcuLaser C7000
Category	Printer
Language	English

Summary

Ready and Error Lights

Status Monitor and Light Interpretation

Explains the role of the EPSON Status Monitor 3 utility and how to interpret printer light status for troubleshooting.

Printer Light Status Table

Details the printer's operational status corresponding to different light states (ON, Flashing, OFF).

Common Error Light Conditions

Describes specific error patterns indicated by printer lights and their initial solutions.

Clearing Jammed Paper

Precautions for Clearing Jammed Paper

Important safety warnings and guidelines to follow before and during the removal of jammed paper.

Clearing Jam - Lower Cassette

Step-by-step instructions and illustrations for removing paper jams from the printer's lower cassette.

Paper Jam - MP Tray

Instructions for clearing paper jams from the printer's Multi-Purpose (MP) tray.

Paper Jam - Cover A (Jam A)

Procedure for clearing paper jams located in the output path cover (Cover A).

Paper Jam - Cover B (Jam B)

Instructions for clearing paper jams within the printer's fuser unit.

Paper Jam - Unit C (Jam C)

Procedure for clearing paper jams from the paper path unit.

Paper Jam - Cover D (Jam D)

Instructions for clearing paper jams within the paper cassette cover.

Paper Jam - Cover E (Jam E)

Steps for clearing paper jams in the optional Large Capacity Paper Unit.

Paper Jam - Cover F (Jam F)

Procedure for clearing paper jams in the Duplex Unit's inverter cover.

Paper Jam - Unit G (Jam G)

Instructions for clearing paper jams in the optional Duplex Unit's main unit.

Removing the Main Unit

Procedure for removing the Duplex Unit's main unit when paper jams cannot be cleared by other methods.