Assembling the Printer 15
Installing the Photoconductor Unit
Handling precautions
❏ When installing the photoconductor unit, avoid exposing it
to room light any longer than necessary.
❏ Keep the photoconductor unit out of the reach of children.
Follow these steps to install the photoconductor unit.
1. Take the photoconductor unit out of its package and unwrap
the protective sheet while holding the handle.
c
Caution:
❏ Be sure not to touch or scratch the surface of the drum.
❏ Avoid touching the drum, since oil from your skin may
permanently damage its surface and affect print quality.
To Next Page
Loading...
