Testing and Connecting the Printer 29
Testing the Printer
To test whether the printer is set up correctly, print a status sheet,
following the procedures below. You will have to first load the
MP tray with paper.
Loading paper
Follow these steps to load paper into the MP tray.
1. Fan a stack of A4 or Letter size paper, then tap it on a flat
surface to even the edges.
2. Load the paper long edge first with the printable surface
facing up, then set the paper guide as shown below.
Printing a status sheet
Follow these steps to print a status sheet.
1. Turn on the printer. The lights and the LCD panel messages
on the control panel change.
2. After the LCD panel shows Ready, press the Enter button
twice. The LCD panel shows Status Sheet.
To Next Page
Loading...
