Epson AcuLaser C8600 - Printing and Deleting Reserve Job Data; Using the Quick Print Job Menu; Using the Confidential Job Menu

Printing and Deleting Reserve Job Data (1/2)
EPSON AcuLaser C8600 Quick Reference
Printing and Deleting Reserve Job Data
Print jobs stored on the printer’s optional
Hard Disk Drive using the Re-Print Job,
Verify Job, and Stored Job options of the
Reserve Job function can be printed and
deleted using the control panel’s Quick Print
Job Menu. Jobs saved using the Confidential
Job option can be printed from the
Confidential Job Menu. Follow the
instructions in this section.
Using the Quick Print Job Menu
Follow these steps to print or delete Re-Print
Job, Verify Job, and Stored Job data.
1. Make sure the LCD panel displays Ready
or Standby, then press the Enter
button to access the control panel menus.
2. Press the
d Down button repeatedly
until Quick Print Job Menu appears on
the LCD panel, then press the Enter
button.
3. Use the
d Down or u Up button to scroll
to the appropriate user name, then press
the Enter button.
4. Use the
d Down or u Up button to scroll
to the appropriate job name, then press
the Enter button.
5. To specify the number of copies you
want to print, press the Enter button,
then use the
d Down and u Up buttons
to select the number of copies.
To delete the print job without printing
any copies, press the
d Down button to
display Delete on the LCD panel.
6. Press the Enter button to start
printing or to delete the data.
Using the Confidential Job Menu
Follow these steps to print or delete
Confidential Job data.
1. Make sure the LCD panel displays Ready
or Standby, then press the Enter
button to access the control panel menus.
2. Press the
d Down button repeatedly
until ConfidentialJobMenu appears on
the LCD panel, then press the Enter
button.
3. Use the
d Down or u Up button to scroll
to the appropriate user name, then press
the Enter button.
4. Enter your four-digit password by using
the corresponding buttons, as shown
below.
Note:
❏ Passwords are always four digits.
❏ Passwords consist of numbers from 1
through 4.
❏ If no print jobs have been saved with the
password you entered, Password
Error appears briefly on the LCD panel
then the printer exits the control panel
menus. Confirm the password and try
again.
1
2
43