16 Handling Paper and Originals
Placing Large or Thick Originals (CX11N Only)
When you scan large or thick originals, you can remove the document cover. Just
open it and pull it straight up.
If you need to press the document flat while you copy or scan it, do not press too hard
and be careful not to move it.
Caution:
Do not use excessive force on the document cover, and do not twist it diagonally.
You may damage the document cover.
When you are done, replace the document cover by inserting the tabs back into the
slots.
Basic.book Page 16 Monday, August 22, 2005 12:35 PM
To Next Page
Loading...
