Customizing Copy Settings 41
Resetting the Copy Settings
There are two ways you can reset the settings to their default values. The first is by
pressing and holding the Reset button. The LCD screen returns to the initial
display.
Note:
Pressing and holding the Reset button resets settings for all modes.
The other way to reset the copy settings is through the Setup menu. Follow these steps
to reset all copy settings.
1. Press the Setup button.
The Setup light turns on and the Setup menu appears in the LCD panel.
2. Press the d button to select Copy Settings, then press the r button.
3. Press the d button to select Copy Factory Settings, then press the r button.
Factory Settings is selected.
4. Press the r button.
5. The Print mode light turns on, indicating a successful reset.
Basic.book Page 41 Monday, August 22, 2005 12:35 PM
To Next Page
Loading...
