8 Handling Paper and Originals
3. Load a stack of paper in the center of the tray with the short edge first and the
printable surface facing up. Pinch the knob and the paper guide together and slide
them against the right side of the stack for a snug fit.
Note:
When loading paper, do not exceed the maximum stack height marker inside the
paper guide.
4. Close the MP tray cover.
Note:
After loading paper, press the Setup button on the control panel, press the
r button to select Printer Settings, press the d button to select Tray Menu, and
match the MP Tray Size and MP Type settings to the loaded paper size.
Basic.book Page 8 Monday, August 22, 2005 12:35 PM
To Next Page
Loading...
