33
Plastic and Laminated Card Specifications
Parent topic: Loading Originals
Related topics
Scanning
Plastic and Laminated Card Specifications
You can load original plastic and laminated cards that meet these specifications in your scanner.
Paper type Paper size Paper thickness Loading capacity
Plastic cards,
embossed (ISO781A
ID-1 compliant)
2.1 × 3.3 inches
(54 × 85.6 mm)
0.05 inch (1.24 mm)
maximum
1 card (horizontal)
Plastic cards, standard
(ISO781A ID-1
compliant)
0.03 inch (0.76 mm)
maximum
5 cards (horizontal)
Laminated cards 4.7 × 5.9 inches (120 ×
150 mm) or smaller
0.03 inch (0.8 mm)
maximum
1 card
Note: Plastic cards with glossy surfaces may not scan properly.
Parent topic: Loading Plastic and Laminated Cards in the Input Tray
Loading Special Originals
You can load a photo or large, thick, or folded original in the input tray using one or more carrier sheets.
You can also load envelopes. Make sure the originals meet the specifications for special originals before
loading them.
1. Open the input tray and pull up its extension.
To Next Page
Loading...
Need help?
General