Epson B11B236201 User Manual

42
7 start button (starts scanning when networking is enabled)
Parent topic: Using the Network Interface Unit
Connecting the Network Interface Unit
See the documentation that came with the optional Epson Network Interface Unit for instructions on
connecting it to your scanner.
Parent topic: Using the Network Interface Unit
Setting Up Network Scanning
You can set up network scanning through the optional Epson Network Interface Unit. First connect the
unit to your scanner and verify that both are working properly. Then follow the instructions here to set up
computers for network scanning using the Epson Scan 2 Utility.
Note: Make a note of the IP address or host name of the Epson Network Interface Unit so you can enter
it in these steps.
1. Do one of the following to start the Epson Scan 2 Utility:
• Windows 10: Click and select EPSON > Epson Scan 2 Utility.
• Windows 8.x: Navigate to the Apps screen and select Epson Scan 2 Utility.
• Windows (other versions): Click or Start, and select All Programs or Programs. Select
EPSON > Epson Scan 2 > Epson Scan 2 Utility.
• Mac: Open the Applications folder, open the Epson Software folder, and select Epson Scan 2
Utility.
2. Select Settings from the Scanner drop-down list.

Epson B11B236201 Specifications

General

Brand	Epson
Model	B11B236201
Category	Scanner
Language	English